Modified: CHANGELOG.md

Fixes #52

CHANGELOG.md

@@ -6,6 +6,10 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
 
 ## [Unreleased]
 
+## [6.0.0] - 2022-02-12
+### Added
+- Windows support with native ScheduledTask! New target `$ make install-schedtask` for Windows users.
+
 ## [5.3.1] - 2022-02-12
 ### Fixed
 - Launchagentdir make macro

Makefile

@@ -18,7 +18,8 @@
 .PHONY: help clean uninstall \
 	install-systemd install-cron \
 	install-targets-script install-targets-conf install-targets-systemd \
-	install-targets-cron \
+	install-targets-cron install-targets-launchagent \
+	install-targets-schedtask \
 	activate-launchagent deactivate-launchagent
 
 #### Macros ###################################################################
@@ -69,6 +70,7 @@ SRCS_CONF		= $(wildcard $(DIR_CONF)/*)
 SRCS_SYSTEMD	= $(wildcard $(DIR_SYSTEMD)/*)
 SRCS_CRON		= $(wildcard $(DIR_CRON)/*)
 SRCS_LAUNCHAGENT= $(wildcard $(DIR_LAUNCHAGENT)/*)
+SRCS_SCHEDTASK	= install_restic_scheduledtask.ps1
 
 # Local build directory. Sources will be copied here,
 # modified and then installed from this directory.
@@ -85,6 +87,7 @@ BUILD_SRCS_CONF			= $(addprefix $(BUILD_DIR)/, $(SRCS_CONF))
 BUILD_SRCS_SYSTEMD		= $(addprefix $(BUILD_DIR)/, $(SRCS_SYSTEMD))
 BUILD_SRCS_CRON			= $(addprefix $(BUILD_DIR)/, $(SRCS_CRON))
 BUILD_SRCS_LAUNCHAGENT	= $(addprefix $(BUILD_DIR)/, $(SRCS_LAUNCHAGENT))
+BUILD_SRCS_SCHEDTASK	= $(addprefix $(BUILD_DIR)/, $(SRCS_SCHEDTASK))
 
 # Destination directories
 DEST_DIR_SCRIPT		= $(PREFIX)/$(DIR_SCRIPT)
@@ -137,6 +140,10 @@ install-cron: install-targets-script install-targets-conf install-targets-cron
 install-launchagent: install-targets-script install-targets-conf \
 						install-targets-launchagent
 
+# target: install-schedtask - Install Windows ScheduledTask
+install-schedtask: install-targets-script install-targets-conf \
+						install-targets-schedtask
+
 # Install targets. Prereq build sources as well,
 # so that build dir is re-created if deleted.
 install-targets-script: $(DEST_TARGS_SCRIPT) $(BUILD_SRCS_SCRIPT)
@@ -145,6 +152,8 @@ install-targets-systemd: $(DEST_TARGS_SYSTEMD) $(BUILD_SRCS_SYSTEMD)
 install-targets-cron: $(DEST_TARGS_CRON) $(BUILD_SRCS_CRON)
 install-targets-launchagent: $(DEST_TARGS_LAUNCHAGENT) \
 	$(BUILD_SRCS_LAUNCHAGENT) $(DEST_DIR_MAC_LOG)
+install-targets-schedtask: $(BUILD_SRCS_SCHEDTASK)
+	./$<
 
 # Copies sources to build directory & replace "$INSTALL_PREFIX".
 $(BUILD_DIR)/% : %

README.md

@@ -50,6 +50,7 @@ Tip: use the Section icon in the top left of this document to navigate the secti
 Depending on your system, the setup will look different. Choose one of
 * <img height="16" width="16" src="https://unpkg.com/simple-icons@v6/icons/linux.svg" /> [Linux + Systemd](#setup-linux-systemd)
 * <img height="16" width="16" src="https://unpkg.com/simple-icons@v6/icons/apple.svg" /> [macOS + LaunchAgent](#setup-macos-launchagent)
+* <img height="16" width="16" src="https://unpkg.com/simple-icons@v6/icons/windows.svg" /> [Windows + ScheduledTask](#setup-windows-scheduledtask)
 * <img height="16" width="16" src="https://unpkg.com/simple-icons@v6/icons/clockify.svg" /> [Cron](#setup-cron) - for any system having a cron daemon. Tested on FreeBSD and macOS.
 
 ## Setup Linux Systemd
@@ -272,6 +273,13 @@ With Homebrew you can easily install this project from the [erikw/homebrew-tap](
 $ brew install erikw/tap/restic-automatic-backup-scheduler
 ```
 
+Then control the service with homebrew:
+```console
+$ brew services start restic-automatic-backup-scheduler
+$ brew services restart restic-automatic-backup-scheduler
+$ brew services stop restic-automatic-backup-scheduler
+```
+
 ### Manual
 1. In general, follow the same setup as in (#setup-linux-systemd) except for:
   * use `make install-launchagent` instead of `make install-systemd`
@@ -300,6 +308,48 @@ $ launchctl bootout gui/$UID/com.github.erikw.restic-automatic-backup
 
 If you updated the `.plist` file, you need to issue the `bootout` followed by `bootrstrap` and `enable` sub-commands of `launchctl`. This will guarantee that the file is properly reloaded.
 
+
+## Setup Windows ScheduledTask
+This is one of may ways you can get restic and this backup script working on Windows:
+1. Install [scoop](https://scoop.sh/)
+1. Install dependencies from a PowerShell with administrator privileges:
+   ```console
+	powershell> scoop install restic make git
+   ```
+1. In a non-privileged PowerShell, start git-bash and clone this repo
+   ```console
+	powershell> git-bash
+	git-bash$ mkdir ~/src && cd ~/src/
+    git-bash$ git clone https://github.com/erikw/restic-systemd-automatic-backup.git && cd $(basename "$_" .git)
+   ```
+1. Install scripts, conf and the ScheduledTask
+   ```console
+    git-bash$ make install-schedtask
+   ```
+1. Edit configs and initialize repo according to *TL;DR* section above
+   ```console
+    git-bash$ vim /etc/restic/*
+    git-bash$ source /etc/restic/default.env.sh
+    git-bash$ restic init
+    git-bash$ restic_backup.sh
+   ```
+   Note that you should use cygwin/git-bash paths e.g. in `default.env.sh` you can have
+   ```bash
+	export RESTIC_BACKUP_PATHS='/c/Users/<username>/My Documents'
+   ```
+1. Inspect the installed tasks and make a test run
+   1. Open the app "Task Scheduler" (`taskschd.msc`)
+   1. Go to the local "Task Scheduler Library"
+   1. Right click on one of the newly installed tasks e.g. `restic_backup` and click "run".
+      - If the tasks are not there, maybe you opended it up before `make install-schedtask`: just close and start it again to refresh.
+   1. Now a git-bash window should open running `restic_backup.sh`, and the next time the configured schedule hits!
+1. With `taskschd.msc` you can easily start, stop, delete and configure the scheduled tasks to your liking.
+
+
+After installing, you can control your backups through `tasksched.msc`:
+<a href="img/tasksched.png" title="Windows Task Scheduler"><img src="img/tasksched.png" width="512" alt="Windows Task Schedulder"></a>
+
+
 ## Setup Cron
 If you want to run an all-classic cron job instead, do like this:
 

bin/restic_backup.sh

@@ -57,6 +57,10 @@ for backup_path in "${backup_paths[@]}"; do
 	fi
 done
 
+# --one-file-system is not supportd on Windows (=msys).
+FS_ARG=
+test "$OSTYPE" = msys || FS_ARG=--one-file-system
+
 # NOTE start all commands in background and wait for them to finish.
 # Reason: bash ignores any signals while child process is executing and thus the trap exit hook is not triggered.
 # However if put in subprocesses, wait(1) waits until the process finishes OR signal is received.
@@ -72,7 +76,7 @@ wait $!
 # --tag lets us reference these backups later when doing restic-forget.
 restic backup \
 	--verbose="$RESTIC_VERBOSITY_LEVEL" \
-	--one-file-system \
+	$FS_ARG \
 	--tag "$RESTIC_BACKUP_TAG" \
 	--option b2.connections="$B2_CONNECTIONS" \
 	"${exclusion_args[@]}" \

install_restic_scheduledtask.ps1

@@ -0,0 +1,19 @@
+#!/usr/bin/env pwsh
+# Install restic scheduled tasks.
+# Test run the installed actions by
+#   1. open the app "Task Scheduler" (taskschd.msc)
+#   2. go to the local "Task Scheduler Library"
+#   3. right click on the new tasks  and click "run".
+# Reference: https://blogs.technet.microsoft.com/heyscriptingguy/2015/01/13/use-powershell-to-create-scheduled-tasks/
+# Reference: https://www.davidjnice.com/cygwin_scheduled_tasks.html
+
+
+# Install restic_backup.sh
+$action = New-ScheduledTaskAction -Execute 'C:\Program Files\Git\git-bash.exe' -Argument '-l -c "source $INSTALL_PREFIX/etc/restic/default.env.sh && $INSTALL_PREFIX/bin/restic_backup.sh"'
+$trigger =  New-ScheduledTaskTrigger -Daily -At 7pm
+Register-ScheduledTask -Action $action -Trigger $trigger -TaskName "restic_backup" -Description "Daily backup to B2 with restic."
+
+# Install restic_check.sh
+$action = New-ScheduledTaskAction -Execute 'C:\Program Files\Git\git-bash.exe' -Argument '-l -c "source $INSTALL_PREFIX/etc/restic/default.env.sh && /INSTALL_PREFIX/bin/restic_check.sh"'
+$trigger =  New-ScheduledTaskTrigger  -Weekly -WeeksInterval 4 -DaysOfWeek Sunday -At 8pm -RandomDelay 128
+Register-ScheduledTask -Action $action -Trigger $trigger -TaskName "restic_check" -Description "Check B2 backups with restic."